Calculate Wine Rack
Wine Rack Measurements
specific to your measurements.. No Extra Pricing Cost
phone / email with sizes, and we will measure for
- Corner Curved
1. Measure the space you wish to put the wine rack into, consider skirting boards.
2. To convert your measurements to bottle
spaces consult the chart. Take the nearest size under your
measurement. For example if you have 1000mm the number of bottles
would be 10 (974mm). These sizes apply to both the vertical and the
horizontal dimensions of the racks. Allow room for a bottle to
fit on top. Larger bottles 1.5ltr will fit on top.
3.Multiply the vertical number by the
horizontal number to give the total number of
The racks are 200mm in depth, single
bottle rack. 500mm in depth double bottle and 300mm in depth for
display bottle rack.
With larger racks, keep in mind, access
to the installation area. Should that access be difficult we can
make the rack in sections to facilitate installation, Joiners
are used to join the racks together once in place.
Where racks meet at right angles in
corners allow 455mm clearance between the racks for removal of
Corner Units can be placed at right
angles allow 700mm from each side, these would be joined with the
straight wall racks to view as one complete rack.
measure the total width the highest point the lowest point and whether
the highest side is on the left hand side or right.
email us your measurements
and we will work this out for you.
private use racks
Bottle display racks, 300mm deep
Two bottles deep, 500mm deep
Two bottle Isle (take from both side)
us for pricing information
regarding double bottle & bottle display racks
Our wine racks are
not limited to 25 bottles, the highest rack installed is 33 bottles
|Size in mm|